News

Charger use method

Release time:

2024-06-11

1. First check whether the charger voltage and polarity match the battery.

1. First check whether the charger voltage and polarity match the battery.

2. Connect the positive pole N "" of the charger to the positive pole N "" of the battery; The negative pole L "-" is connected to the negative pole. (The wrong polarity will not have any effect on the battery, but it will burn out the safety of the charger) The power plug of the charger is connected to the power supply.

3. The red indicator light is on, indicating that the power supply has been connected and high current charging is in progress. The red and green indicator lights flash, indicating that 85% of the charging has been completed, and automatic detection and adjustment of charging voltage, current and gap pulse width are being carried out.

4. The red light is off and the green light is on, indicating that 95% of the charging has been completed and the battery maintenance program has been entered. After an hour of maintenance, the battery is fully charged and can be unplugged. If it is not urgent, it is not necessary to unplug the power plug, which has no effect on the battery.

Pre

What is the principle of smart charger

None

Next

Pre:

What is the principle of smart charger

Next:

None

Recommend News